Dobladora de tubo

Round Tubing (Non-Ferrous): 1-1/4″ x 0.065″
Round Tubing (Mild Steel): 1-1/8″ x 0.065″
Round Tubing (Stainless Steel): 7/8″ x 0.065
Pipe: 1/2″ Schedule 80
Square Tubing (Mild Steel): 3/4″ x 0.083″
Rectangular Tubing (Mild Steel): 3/4″ x 1″ x 0.065″
Round Bar: 3/4″
Direction of Bend: Counter ClockwiseMaximum Radius: 8-3/4″
Maximum Bend Angle: 180 degrees
Bending Arm Speed: 24 RPM
Motor: 3 Horsepower, 208-220/440 Volt, 1,145 / 955 RPM, 9.4-9.2/4.6 – 10.2/5.1 Amps, 60/50 Hz
Electrical: 208-220 / 440 Volt, Three Phase
Overall Dimensions: 90″ x 33″ x 50″ tall
Dobladora de tubo

Round Tubing (Non-Ferrous): 1-1/4″ x 0.065″
Round Tubing (Mild Steel): 1-1/8″ x 0.065″
Round Tubing (Stainless Steel): 7/8″ x 0.065
Pipe: 1/2″ Schedule 80
Square Tubing (Mild Steel): 3/4″ x 0.083″
Rectangular Tubing (Mild Steel): 3/4″ x 1″ x 0.065″
Round Bar: 3/4″
Direction of Bend: Counter ClockwiseMaximum Radius: 8-3/4″
Maximum Bend Angle: 180 degrees
Bending Arm Speed: 24 RPM
Motor: 3 Horsepower, 208-220/440 Volt, 1,145 / 955 RPM, 9.4-9.2/4.6 – 10.2/5.1 Amps, 60/50 Hz
Electrical: 208-220 / 440 Volt, Three Phase
Overall Dimensions: 90″ x 33″ x 50″ tall
